Copyright 2006-2016 Zhuhai Hengrui Power Technology Co.,Ltd All Rights Reserved. 備案號:粵ICP備2023083886號
Tel：0756-2251627 Fax：0756-8595799 Email：hero@zh-hero.com Code：519000
 |
|
HDPL-850 microcomputer line optical fiber longitudinal difference protector |
|
 |
|
Applicable to the optical fiber longitudinal difference, current and voltage protection and monitoring of non-directly grounded systems or short circuits (<10kM) in small resistance ground systems, may be installed locally on a switch cabinet.
1.Optical fiber longitudinal difference protection 2.Compounded voltage lock definite time delay (directional) instantaneous over-current protection 3.Over-current protection 4.Zero sequence (directional) Over-current protection 5.Compounded voltage lock 6.Reclosing 7.Post-acceleration 8.Under-frequency load shedding 9.VT failure judgment 10.TA failure judgment 11.Electrical operating circuit 12.Fault oscillograph capture Ordering instructions Provide the following upon ordering: 1. Name, model and quantity of the device. Please specify any special requirement differs from our standard product. 2. Voltage class. The operating power supply for any device is intended for both AC and DC purposes, with 110V and 220V inputs; the 220V version will be provided unless otherwise specified. 3. Communication port: The device standard communication configure is a single 485. If needs dual RS485 network which shall be specified. 4. Ratings of key parameters For a protector, provide the nominal rated current (1Aor5A) For a device with the zero sequence current protection function in a low-current ground system, provide the rated zero sequence current (0.2Aor0.02A) 5. Term and place of delivery, means of transport 6. Other terms shall be negotiated. |
|